线图用于展示结构，最终尺寸与接头以确认的规格为准。
产品概述
高质量等级材料 + 一体化多功能热处理；螺纹全部数控加工并配置国际标准螺纹规； 管端内加厚工艺提高焊口强度，摩擦焊后回火处理，质量稳定、接卸快速。
规格参数
产品详情
KISN DTH drill pipe covers 3 in to 5½ in (76 mm to 140 mm) for blasthole drilling in open-pit mines, quarries and construction. Every pipe is built from high-grade tube with an integrated multi-function heat treatment, and every thread is cut on a CNC machine and checked against international standard thread gauges.
Thread Options
Four thread families are supplied — API, CUBEX, DIBH and the Z series — so the string can be matched to the hammer and the rig already on site rather than the other way around. Imperial sizes are marked per standard conversion (5¼ in = 133 mm, 5½ in = 140 mm).
Pipe-End Upsetting and Stress Relief
Pipe ends are internally upset before welding, which thickens the wall at the point of highest load and raises weld strength. After friction welding, the joint is stress-relieved. The result is a pipe that makes up and breaks out quickly and holds its quality run after run, which is what actually decides your cost per metre drilled.
Where It Works
Open-pit mining, quarry blasthole drilling, and construction and infrastructure drilling where a DTH hammer is run.
Where It Ships
Supplied to contractors in Africa, Southeast Asia and the Middle East.
技术规格
| 直径 INCH | 直径 MM | 钻杆长度 MM | 壁厚 MM | 螺纹 |
|---|---|---|---|---|
| 3 | 76 | 1000-6000 | 4-10 | API 2-3/8" REG |
| 3 1/4 | 83 | 1000-6000 | 4-10 | API 2-3/8" REG |
| 3 1/2 | 89 | 1000-6000 | 4-10 | API 2-3/8" REG |
| 3 1/2 | 89 | 1000-6000 | 4-11 | CUBEX #21 |
| 4 | 102 | 1000-9000 | 6-12 | API 2-7/8" REG |
| 4 | 102 | 1000-9000 | 6-12 | CUBEX #21 |
| 4 | 102 | 1000-9000 | 6-12 | CUBEX #24 |
| 4 | 102 | 1000-9000 | 6-12 | DIBH 3-1/8" |
| 4 | 102 | 1000-9000 | 6-12 | Z 2-1/2" |
| 4 1/2 | 114 | 1500-9144 | 6-12 | API 3-1/2" REG |
| 4 1/2 | 114 | 1500-9144 | 6-12 | CUBEX #28 |
| 4 1/2 | 114 | 1500-9144 | 6-12 | DIBH 3-1/2" |
| 5 | 127 | 1500-9500 | 6-12 | API 3-1/2" REG |
| 5 | 127 | 1500-9500 | 6-12 | CUBEX #28 |
| 5 1/4 | 133 | 1500-9500 | 6-12 | API 3-1/2" REG |
| 5 1/2 | 140 | 1500-9500 | 6-12 | API 4-1/2" REG |
注：英制规格按标准换算标注（5 1/4" = 133MM，5 1/2" = 140MM）。
常见问题
What sizes of DTH drill pipe do you make?
3 in to 5½ in — 76 mm, 83 mm, 89 mm, 102 mm, 114 mm, 127 mm, 133 mm and 140 mm. The full table, with wall thickness and thread, is on this page.
Which threads are available?
API, CUBEX, DIBH and Z series threads. Tell us the hammer and rig you run and we will confirm the match.
Are the threads gauge-checked?
Yes. Threads are CNC-machined and checked with international standard thread gauges.
What is the minimum order and lead time?
Standard minimum order is 10 pieces, with a lead time of 10 days. Special specifications are made to order.